SENS

RECASENS offers a 5-year warranty for the SENS range.

This warranty covers the deterioration of the fabric or its color that may occur during its exposure to solar radiation and atmospheric agents, both under normal conditions and by correctly performing the maintenance operations as indicated in the corresponding section.

Within this period of 5 years, RECASENS will replace free of charge the footage recognized as defective or will pay its cost.

The warranty covers only the value of the tarpaulin and excludes all other costs, including the cost of fabrication and installation.

The warranty does not cover any deterioration due to abuse, neglect, vandalism, burns of any kind, fire and natural disasters.

In particular, it does not cover deterioration caused by:

• The lack of maintenance of the canvas or the use of inappropriate products or tools. In particular, under no circumstances should solvents, hard brushes or other scraping instruments that may damage the protective finish of the canvas be used.
• Atmospheric or phytosanitary contamination.
• Dirt produced by animals.
• Placing objects on top of the tarpaulin, or falling objects on the tarpaulin.
• Unusual weather conditions (storms, thunderstorms, etc.).

SENS® fabrics have a special Infinity Plus finish that provides long-lasting protection against mold and excellent water repellency. Proper care of the fabrics is essential, as the accumulation of dust, atmospheric pollutants, organic materials, and general dirt can damage this protection, shortening the fabric’s lifespan. For this reason, it is necessary to remove it. If cleaning is done regularly, in most environments a deeper cleaning process will only be needed every 1 or 2 years.

Cleaning Preparation

Gather the necessary materials: mild biodegradable detergent, warm water, soft brush or sponge, clean cloth, bleach, starch, liquid dish soap.

1. General Cleaning

HAND WASHING

• Vacuum the surface to remove dust and particles.
• Mix lukewarm water with mild detergent in a container.
• Moisten a clean cloth in the solution and gently rub.
• Rinse with a damp cloth to remove detergent.
• Air dry. Repeat rinsing and drying if soap remains.

MACHINE WASHING

• Remove any dirt or residue with a soft brush or vacuum.
• Use a gentle cycle and cold water.
• Use the standard amount of detergent.
• Air dry, preferably in the shade.

2. Stain Cleaning

DRY STAINS

• Gently scrape off excess with a plastic knife or card.
• Apply a mixture of water and mild detergent on a clean cloth and rub the stain with a soft brush.

WET STAINS

• Blot the stain with a dry cloth.
• Apply the cleaning solution as mentioned above.
• Rinse thoroughly and air dry.

MOLD AND MILDEW STAINS

• Prepare a solution of ¼ cup liquid dish soap with 1 cup bleach per 4 liters of water.
• Apply the cleaning solution over the entire area and leave for 10-15 minutes.
• Thoroughly clean the entire surface with a soft brush.
• Rinse thoroughly to remove all solution.
• Air dry outdoors.

OILY STAINS

• Absorb the stain with starch.
• Let it sit for 10 minutes.
• Remove excess with a plastic knife or card.
• Apply the hand-washing cleaning solution and follow the process.

Regular Maintenance

• Vacuum or brush the fabrics regularly to avoid dirt buildup.
• Treat stains immediately to prevent setting.

Storage

• Make sure the fabrics are clean and dry before storing.
• Store in a cool, dry place to avoid moisture and mold.

Maintenance for Long-Lasting use

SENS® fabrics have a PFAS-free Infinity Plus finish that lasts for many years; however, when performing a deep cleaning and applying a specific stain treatment product, we recommend applying a treatment booster. After cleaning, apply a PFAS-free waterproofing product following the manufacturer’s instructions.

Precaution

• Avoid using harsh chemical products.
• Do not use high-temperature dryers; always air dry whenever possible.

Tips

• For severe and persistent stains, consult the specific stain guide.
• If stains persist, repeat the process or increase the recommended solution quantities.
• Always try to clean the largest fabric surface possible to avoid water rings and marks.
• You can use an extractor for upholstered and non-removable pieces.
• If wrinkles appear, use an iron on the synthetic setting without steam. Due to heat sensitivity, always test first in an inconspicuous area.
• To protect the environment, make sure to collect dirty water when using bleach, as it can be harmful to people, animals, and plants.